When you intend to renovate your kitchen, you wish to work towards the standard dimensions for Australian kitchen for optimum ergonomics and functionality. In addition, don’t forget to grab some kitchen design inspirations in passing.
Please find your expert guide for optimal kitchen design measurements below.
Standard benchtop height is 900mm. However, depending on your stature it can range from 850mm to 1000mm.
Standard depth of a benchtop is 600mm. But have a look at your fridge’s depth first. If you don’t want the fridge to protrude out of your kitchen row, adjust the depth of your benchtop accordingly. See standard fridge dimensions below.
The most popular benchtops in Australia are made of engineered stones (e.g. Caesarstone, Quantum Quartz, Essastone, Smartstone) and laminate finishes. The average thickness of the latter one is around 33mm, whereas engineered stone usually comes in 20mm or a multiple thereof. If you wish to choose an engineered stone, our recommendation was to go with a thickness of 40mm as this looks well-proportioned and classy.
Galley kitchens with an island bench are still going strong in 2021. For its installation allow for approx 1200mm between the kitchen row and the island bench. If this space is too narrow, it becomes awkward when more than one person is working in the kitchen or the kids are running around your legs. Installed too far apart from each other, the kitchen becomes less efficient to work in.
Width and depth
The size of your kitchen island bench can be as large as your space allows. The only restriction is the width of the slab, if you opt for an engineered stone. A standard slab size is 3060mm by 1440mm, but some suppliers offer oversized jumbo slabs which eliminate the need of an unsightly joint between two slabs.
A good island width to work with is 1200mm, especially if you plan to place some barstools on the other side. In this case you wish to accommodate for the necessary leg room.
An island bench is a great place to sit on bar stools while having your breakfast or a snack. Allow for 300mm of leg room underneath the benchtop to sit comfortably. You need to check with your kitchen manufacturer how big an unsupported benchtop overhang can be based on your chosen material.
Plan for 1000mm walkway either side of the island bench. This will allow enough space for people to move around without having to turn sideways.
The sizes of fridges vary significantly. For a single door fridge allow around 800mm width and 780mm depth. A double door fridge is around 1200mm wide and 850mm deep. If you have selected a fridge, check its required ventilation space in the manual to incorporate this space into your planning.
Whether you go for a wall or under bench oven, the standard width is 600mm. For large families and for entertainment standard options include 700mm and 900mm.
Clearance between benchtop and overhead cupboards to be a minimum of 600mm. However, if you wish to install a gas cooktop, you need to allow for at least 650mm. Read the manual of the cooktop and rangehood manufacturers and follow their requirements. If uncertain, please check with a licensed electrician for the safety of your family.
Dishwashers and dish drawers are usually 600mm wide, but they also come in 450mm suitable for an apartment or studio.
Sinks come in all shapes and sizes. For a double sink allow for a length of around 800mm and a width of 480mm plus drainage area on the benchtop. The depth of the sink is around 200mm.
If you wish to plan your kitchen sink with a single bowl allow for a length of 550mm and a width of around 500mm.
Kickboards height is usually between 90mm and 150mm and set back from the cabinet’s carcass by around 50mm.
We hope this information helps you with the design of your new kitchen. In addition, here are some kitchen design ideas up for grabs.
You can get a pdf version of the Standard Dimensions for Australian Kitchen emailed for you to print out. Please type in your name and email address below: